Ricoh CL3000 Printer User Manual


 
Operating Instructions Administrator Reference
119
*1
The "Sample Print" menu and the "Locked Print" menu appear only when the optional Printer Hard Disk
is installed.
*2
The HDD Format and the "Spool Printing" menu appears only when the optional Printer Hard Disk is
installed.
*3
ROM Update is not currently used.
*4
The "WL.LAN Signal" menu appears only when "IEEE 802.11b" is selected in "LAN Type" in the Host
Interface menu.
*5
While the printer is On Line, press the {
{{
{Enter #}
}}
} key, and then press the {
{{
{Escape}
}}
} key, finally press the
{
{{
{Menu}
}}
} key. You can access the "Menu Protect", "Series Prnt.Job" "Letterhead Mode", "E.Saver2
OnOff", "USB Setting" on the panel display.
*6
The Duplex menu appears only when the optional AD440 is installed.
*7
The Network Setup menu appears only when the optional Network Interface Unit or 802.11b Interface
Unit is installed.
*8
The IEEE 1394 Setup menu appears only when the optional 1394 Interface Unit is installed.
*9
The IEEE 802.11b menu appears only when the optional 802.11b Interface Unit is installed.
PCL Menu p.171 Orientation
Form Lines
Font Source
Font Number
Point Size
Font Pitch
Symbol Set
Ext. A4 Width
Append CR to LF
Language p.177
Category Function Menu