Operating Instructions Administrator Reference
91
B In the [Class of new object] box, click "Print Server", and then click [OK]. When you are
using NetWare 5, click "Print Sever (Non NDPS)".
C In the [Print Server name] box, type the name of the print server.
Important
❒ Use the same name as that specified using the NIB Setup Tool. (Step
F
- A).
D Click [Define additional properties] to check a box, and click [Create].
M
MM
M
Assign the printer to the created print server as follows:
A Click [Assignments], and then click [Add] in the [Assignments] group.
B In the [Available objects] box, click the queue created in the step
K
, and then click [OK].
C In the [Printers] group, click the printer assigned in step B
BB
B, and then click [Printer Number].
D Type the printer number, and then click [OK].
Important
❒ Use the same number as that specified as Remote Printer No. using the NIB Setup Tool.
(Step
F
- E).
E After confirming the settings, click [OK].
N
NN
N
Start the print server by typing the following from the console of the NetWare Server.
If it is running, restart it after exiting it.
❖
❖❖
❖ To exit
CAREE: unload pserver
❖
❖❖
❖ To start
CAREE: load pserver print_server_name