Filter
Top Products
Options
38
1
User Account Enhance Unit Type B
R
WARNING:
R
CAUTION:
Note
❒ Disposal should take place at an
authorized dealer or an appropri-
ate collection site. An IC2 lithium
battery is inside the User Account
Enhance Unit.
❒ If you dispose the unit, separate
the IC2 lithium battery from the
board, and then dispose of them
according to the local regulations.
Important
❒ Before touching the User Account
Enhance Unit, touch something
metal to discharge any static elec-
tricity. Static electricity can dam-
age the User Account Enhance
Unit.
❒ Do not subject the User Account
Enhance Unit to physical shocks.
A
AA
A
Check the contents of the package
for the following:
❖
❖❖
❖ User Account Enhance Unit
❖
❖❖
❖ Screw
Note
❒ The other screw supplied is not
to be used.
B
BB
B
Turn off the power, and then un-
plug the power cable.
C
CC
C
Remove the two screws that fas-
ten the controller board on the
back of the printer.
The removed screws will be used
in step
H
to fasten the controller
board.
• Do not place the IC2 lithium
battery near or into fire, or it
will explode and cause a burn.
• The User Account Enhance
Unit installed on the controller
board has a IC2 lithium battery
which can explode if replaced
incorrectly. Replace the User
Account Enhance Unit only
with the indicated one.
• Do not touch the inside of the
controller board compartment. It
may cause a machine malfunc-
tion or a burn.
ZHBP080E
AresPGBOptionSetup-F_FM.book Page 38 Monday, July 29, 2002 1:12 PM