Filter
Top Products
Two Port 10/100 Managed Ethernet Switch with 16-Bit Non-PCI CPU Interface
Datasheet
SMSC LAN9311/LAN9311i 239 Revision 1.4 (08-19-08)
DATASHEET
14.2.6.6 Switch Fabric MAC Address High Register (SWITCH_MAC_ADDRH)
This register contains the upper 16-bits of the MAC address used by the switch for Pause frames. This
register is used in conjunction with Switch Fabric MAC Address Low Register
(SWITCH_MAC_ADDRL). The contents of this register are optionally loaded from the EEPROM at
power-on through the EEPROM Loader if a programmed EEPROM is detected. The least significant
byte of this register (bits [7:0]) is loaded from address 05h of the EEPROM. The second byte (bits
[15:8]) is loaded from address 06h of the EEPROM. These EEPROM values are also loaded into the
Host MAC Address High Register (HMAC_ADDRH). The Host can update the contents of this field
after the initialization process has completed.
Refer to Section 9.6, "Host MAC Address," on page 120 for details on how the EEPROM Loader loads
this register. Section 10.2.4, "EEPROM Loader," on page 150 contains additional details on using the
EEPROM Loader.
Offset: 1F0h Size: 32 bits
BITS DESCRIPTION TYPE DEFAULT
31:16 RESERVED RO -
15:0
Physical Address[47:32]
This field contains the upper 16-bits (47:32) of the physical address of the
Switch Fabric MACs.
R/W FFFFh