Filter
Top Products
Two Port 10/100 Managed Ethernet Switch with 16-Bit Non-PCI CPU Interface
Datasheet
Revision 1.4 (08-19-08) 346 SMSC LAN9311/LAN9311i
DATASHEET
14.5.2.23 Port x MAC Transmit Configuration Register (MAC_TX_CFG_x)
This read/write register configures the transmit packet parameters of the port.
Register #: Port0: 0440h Size: 32 bits
Port1: 0840h
Port2: 0C40h
BITS DESCRIPTION TYPE DEFAULT
31:8 RESERVED RO -
7
MAC Counter Test
When set, TX and RX counters that normally clear to 0 when read, will be
set to 7FFF_FFFCh when read with the exception of the Port x MAC
Receive Packet Length Count Register (MAC_RX_PKTLEN_CNT_x), Port x
MAC Transmit Packet Length Count Register (MAC_TX_PKTLEN_CNT_x),
and Port x MAC Receive Good Packet Length Count Register
(MAC_RX_GOODPKTLEN_CNT_x) counters which will be set to
7FFF_FF80h.
R/W 0b
6:2
IFG Config
These bits control the transmit inter-frame gap.
IFG bit times = (IFG Config *4) + 12
R/W 10101b
1
TX Pad Enable
When set, packets shorter than 64 bytes are padded with zeros if needed
and a FCS is appended. Packets that are 60 bytes or less will become 64
bytes. Packets that are 61, 62, and 63 bytes will become 65, 66, and 67
bytes respectively.
R/W 1b
0
TX Enable
When set, the transmit port is enabled. When cleared, the transmit port is
disabled.
R/W 1b