Filter
Top Products
AMD Geode™ SC3200 Processor Data Book 227
Core Logic Module - Bridge, GPIO, and LPC Registers - Function 0
32581C
8 IRQ8# Source. Selects the interface source of the IRQ8# signal.
0: ISA - IRQ8# internal signal. (Connected to internal RTC.)
1: LPC - SERIRQ (ball J31).
7 IRQ7 Source. Selects the interface source of the IRQ7 signal.
0: ISA - IRQ7 (unavailable externally).
1: LPC - SERIRQ (ball J31).
6 IRQ6 Source. Selects the interface source of the IRQ6 signal.
0: ISA - IRQ6 (unavailable externally).
1: LPC - SERIRQ (ball J31).
5 IRQ5 Source. Selects the interface source of the IRQ5 signal.
0: ISA - IRQ5 (unavailable externally).
1: LPC - SERIRQ (ball J31).
4 IRQ4 Source. Selects the interface source of the IRQ4 signal.
0: ISA - IRQ4 (unavailable externally).
1: LPC - SERIRQ (ball J31).
3 IRQ3 Source. Selects the interface source of the IRQ3 signal.
0: ISA - IRQ3 (unavailable externally).
1: LPC - SERIRQ (ball J31).
2 Reserved. Must be set to 0.
1 IRQ1 Source. Selects the interface source of the IRQ1 signal.
0: ISA - IRQ1 (unavailable externally).
1: LPC - SERIRQ (ball J31).
0 IRQ0 Source. Selects the interface source of the IRQ0 signal.
0: ISA - IRQ0 Internal signal. (Connected to OUT0, System Timer, of the internal 8254 PIT.)
1: LPC - SERIRQ (ball J31).
Offset 04h-07h SERIRQ_LVL — Serial IRQ Level Control Register (R/W) Reset Value: 00000000h
31:21 Reserved.
20 INTD# Polarity. If LPC is selected as the interface source for INTD# (F0BAR1+I/O Offset 00h[20] = 1), this bit allows signal
polarity selection.
0: Active high.
1: Active low.
19 INTC# Polarity. If LPC is selected as the interface source for INTC# (F0BAR1+I/O Offset 00h[19] = 1), this bit allows signal
polarity selection.
0: Active high.
1: Active low.
18 INTB# Polarity. If LPC is selected as the interface source for INTB# (F0BAR1+I/O Offset 00h[18] = 1), this bit allows signal
polarity selection.
0: Active high.
1: Active low.
17 INTA# Polarity. If LPC is selected as the interface source for INTA# (F0BAR1+I/O Offset 00h[17] = 1), this bit allows signal
polarity selection.
0: Active high.
1: Active low.
16 Reserved. Must be set to 0.
15 IRQ15 Polarity. If LPC is selected as the interface source for IRQ15 (F0BAR1+I/O Offset 00h[15] = 1), this bit allows signal
polarity selection.
0: Active high.
1: Active low.
Table 6-31. F0BAR1+I/O Offset: LPC Interface Configuration Registers (Continued)
Bit Description