Filter
Top Products
Alpha 21264/EV67 Hardware Reference Manual
Cache and External Interfaces 4–11
Cache Coherency
4.5.4 Using SysDc Commands
Note the following:
• The conventional response for RdBlk commands is SysDc ReadData or ReadD-
ataShared.
• The conventional response for a RdBlkMod command is SysDc ReadDataDirty.
• The conventional response for ChangeToDirty commands is
ChangeToDirtySuccess or ChangeToDirtyFail.
However, the system environment is not limited to these responses. Table 4–5 shows all
21264/EV67 commands, system responses, and the 21264/EV67 reaction. The 21264/
EV67 commands are described in the following list:
• Rdx commands are generated by load or Istream references.
• RdBlkModx commands are generated by store references.
• The ChxToDirty command group includes CleanToDirty, SharedToDirty, and STC-
ChangeToDirty commands, which are generated by store references that hit in the
21264/EV67 cache system.
• InvalToDirty commands are generated by WH64 instructions that miss in the
21264/EV67 cache system.
• FetchBlk and FetchBlkSpec are noncached references to memory space that have
missed in the 21264/EV67 cache system.
• Rdiox commands are noncached references to I/O address space.
• Evict and STCChangeToDirty commands are generated by ECB and STx_C
instructions, respectively.
Table 4–5 shows the system responses to 21264/EV67 commands and 21264/EV67
reactions.
Table 4–5 System Responses to 21264/EV67 Commands and 21264/EV67 Reactions
21264/EV67
CMD SysDc 21264/EV67 Action
Rdx ReadData
ReadDataShared
This is a normal fill. The cache block is filled and marked clean or
shared based on SysDc.
Rdx ReadDataShared/Dirty The cache block is filled and marked dirty/shared. Succeeding store
commands cannot update the block without external reference.
Rdx ReadDataDirty The cache block is filled and marked dirty.
Rdx ReadDataError The cache block access was to NXM address space. The 21264/EV67
delivers an all-ones pattern to any load command and evicts the block
from the cache (with associated victim processing). The cache block
is marked invalid.
Rdx ChangeToDirtySuccess
ChangeToDirtyFail
Both SysDc responses are illegal for read commands.