Filter
Top Products
50 Brocade Network Advisor IP User Manual
53-1003056-01
IP SNMP credentials
3
8. Click Apply to save your work.
9. Click Close to close the Discover Setup - IP dialog box.
10. Click Yes on the confirmation message.
Editing SNMPv3 credentials
To edit SNMPv3 read-write credentials, complete the following steps.
1. Select Discover > IP Products.
The Discover Setup - IP dialog box displays.
2. Click the Global Settings tab.
3. Click the SNMP tab.
4. Select the SNMPv3 credentials you want to edit in the Selected SNMPv3 Read-Write
Credentials list and click the left arrow button.
The selected credentials display in the Add/Edit SNMPv3 Read-Write Credentials area.
5. Enter a unique label to identify the credentials in the Display Label field of the Add/Edit
SNMPv3 Read-Write Credentials area.
This label can be from 1 through 16 characters long, case sensitive, and allows all printable
ASCII characters.
6. Enter the SNMPv3 user name in the User ID field.
The user name can be from 1 through 16 characters long, case sensitive, and allows all
printable ASCII characters.
7. Select one of the following protocols from the Authentication Protocol list:
• None
• HMAC_MD5
• HMAC_SHA
8. Enter the SNMPv3 authentication password in the Authentication Password field.
The password can be from 8 through 16 characters long, case sensitive, and allows all
printable ASCII characters. The password display as asterisks.
9. Select one of the following protocols from the Privacy Protocol list:
• None
• CBC-DES
• CFB_AES-128
If you select a privacy protocol, the selected protocol encrypts the SNMP request and response
packets.
10. Enter the privacy password in the Privacy Password field.
The password can be from 1 through 16 characters long, case sensitive, and allows all
printable ASCII characters. The password display as asterisks.
11. Click the right arrow button to add the SNMPv3 read-write credentials to the Selected SNMPv3
Read-Write Credentials list.