Filter
Top Products
1130 Brocade Network Advisor IP User Manual
53-1003056-01
Configuration rules
36
Viewing a predefined configuration block
A configuration block is a continuous group of lines within a configuration file within which
conditions will be checked. The block is defined by the line that starts the block and the line that
ends the block.
1. Select Monitor > Policy Monitor.
The Policy Monitor dialog box displays.
2. Click Add.
RFS with Firmware Auto Install
Disabled
Checks whether auto-installation of
the firmware is disabled in
user-specified profile. This condition
should be used inside the profile
block. If the profile name is not
specified in configuration or if user
selects all the profiles (profile.*) then
it will match against first available
profile
No Matches no autoinstall
firmware
No
RFS Radio Interface check Checks whether the specified profile
is configured with Radio interfaces.
This condition should be used inside
the profile block. If the profile name is
not specified in the configuration or if
the user selects all the profiles
(profile.*), then it will match against
the first available profile.
Yes Matches interface radio.* No
RFS Gigabit Ethernet Interface check Checks whether the specified profile
is configured with Gigabit Ethernet
interfaces. This condition should be
used inside the profile block. If the
profile name is not specified in the
configuration or if the user selects all
the profiles (profile.*), then it will
match against the first available
profile.
Yes Matches interface ge.* No
RFS Fast Ethernet Interface check Checks whether the specified profile
is configured with Fast Ethernet
interfaces. This condition should be
used inside the profile block. If the
profile name is not specified in the
configuration or if the user selects all
the profiles (profile.*), then it will
match against the first available
profile.
Yes Matches interface fe.* No
RFS AAA policy Health Check Interval Checks whether the health check
interval has been configured in the
AAA policy.
No Matches health-check interval No
TABLE 95 Predefined conditions (Continued)
Name Description Use
regular
expression
Matches/
Not Matches
Configuration Lines in
exact
order