Filter
Top Products
902 Brocade Network Advisor IP User Manual
53-1003056-01
802.1ag Connectivity Fault Management
28
9. To add a MEP, complete the following steps.
a. Select a product from the Product list.
The list contains all products that are part of the VPLS.
b. Select a VLAN ID from the VLAN ID list.
The list contains all VLAN IDs in the VPLS.
c. Select a port from the Port list.
The list contains all VPLS end-points for the selected VLAN ID.
d. Enter a unique identifier for the end-point in the End Point ID field.
Valid values include 1 through 8191.
e. Select the MEP direction from the Direction list.
Options include:
• Up — Select to set the MEP direction away from the monitored VLAN.
• Down — Select to set the MEP direction towards the monitored VLAN.
f. Click the right arrow button to move the defined MEP to the Selected Maintenance End
Points table.
The Selected Maintenance End Points table lists the configured MEPs. Repeat step 9 for
each MEP you want to add.
10. To edit a MEP, complete the following steps.
a. Select a MEP in the Selected Maintenance End Points table and click the left arrow button
to edit it in the Available Maintenance End Points area.
b. Select a product from the Product list.
The list contains all products that are part of the VPLS.
c. Select a VLAN ID from the VLAN ID list.
The list contains all VLAN IDs in the VPLS.
d. Select a port from the Port list.
The list contains all VPLS end-points for the selected VLAN ID.
e. Enter a unique identifier for the end-point in the End Point ID field.
Valid values include 1 through 8191.
f. Select the MEP direction from the Direction list.
Options include:
• Up — Select to set the MEP direction away from the monitored VLAN.
• Down — Select to set the MEP direction towards the monitored VLAN.
g. Click the right arrow button to move the defined MEP to the Selected Maintenance End
Points table.
The Selected Maintenance End Points table lists the configured MEPs. Repeat step 10 for
each MEP you want to edit.