Filter
Top Products
446 Brocade Network Advisor IP User Manual
53-1003056-01
Ethernet fabric traceroute
14
2. Enter a MAC address, VM name, or IP address in the Source field or click the Source button to
select or search for a source address from the Select Source - Traceroute dialog box (see
Figure 167).
FIGURE 167 Select Source - Traceroute dialog box
In the Select Source - Traceroute dialog box, you can either search from the Available MAC
Addresses list or select a row containing the required source MAC address, VM name, or IP
address and click OK. This list contains all the discovered port MAC addresses (host or device)
connected to the VCS cluster.
The format of the selected source address is displayed based on the conditions in the following
table.
3. Enter a MAC address, VM name, or IP address in the Destination field or click the Destination
button to select or search for a destination address from the Select Destination - Traceroute
dialog box.
In the Select Destination - Traceroute dialog box, you can either search from the Available MAC
Addresses list or select a row containing the required destination MAC address, VM name, or IP
address and click OK. This list contains all the discovered port MAC addresses (host or device)
connected to the VCS cluster.
Source address format Condition
MAC address (VM name) - if VM name exists When a MAC address is entered and the focus is lost.
MAC address (VM name) - if VM name exists When a VM name is entered and the focus is lost.
IP address (VM name) - if VM name exists When an IP address is entered and the focus is lost.