940 Brocade Network Advisor IP User Manual
53-1003056-01
Controller configuration
30
Deploying a controller configuration
Under GSLB Manager, only the entries under the Controller Configuration tab can be deployed to a
ServerIron ADX product that will run the GSLB protocol. Controller configuration deployment can be
scheduled or deployed on demand.
To schedule a controller configuration, refer to “Scheduling a deployment” on page 941.
To deploy a configuration on demand, complete the following steps.
1. Select Configure > Application Delivery > GSLB.
2. Click the Controller Configuration tab.
3. Select the configuration you want to deploy from the Controller list.
4. Click Deploy.
NOTE
When you deploy a controller configuration, the Management application deletes all GSLB
configurations from the ServerIron ADX product to which the configuration is deployed, and
then adds the configuration to the ServerIron ADX product. Therefore, make sure you deploy
GSLB controller configurations when traffic is least likely to be affected.
The Deployment status progress indicator displays. Wait for the deployment to complete. The
configuration remains under the Configuration Controller tab once it is deployed.