Filter
Top Products
540 Brocade Network Advisor IP User Manual
53-1003056-01
FCoE login groups
16
Adding an FCoE login group
Complete the following steps to add switches to a login group. You can manually add ports by
entering the world wide name (WWN) or select available managed CNAs from all discovered hosts.
Only directly-connected devices are supported.
1. Select Configure > FCoE from the menu bar.
or
Right-click the DCB device and select FCoE.
2. Click Add.
The Add Login Group dialog box displays, as shown in Figure 200.
FIGURE 200 Add Login Group dialog box
3. Select an existing switch from the Switch list, or enter the WWN of the switch that will be added
to the FCoE login group.
4. Select one of the following Login Members options:
• Allow all — Click to allow all login members into the Available Members list.
• Allow specific — Click to allow specific login members into the Available Members list. If
you select this option, you can add specific login members using the options in the
Available Members area.
5. Select one of the following Available Member options:
• Port WWN — Click to enter the world wide name (WWN) of the port to associate with the
selected switch. The member port WWN text field allows a maximum of 16 digits.
• Managed CNAs — Click to show a list of products and ports which can be selected as login
group members.
6. Select available members from the Products/Ports list and click the right arrow button to move
the available members to the Selected Members list.