Brocade Network Advisor IP User Manual 997
53-1003056-01
IP historical performance monitoring
33
FIGURE 403 Historical Data Collectors dialog box
All configured data collectors are listed, showing the following information:
• Name - The name of the data collector.
• Enabled - Whether or not the data collector is enabled (Yes) or disabled (No).
NOTE
The Netiron Ether Stats Collector and NOS Ethernet Port Optics Collector will be disabled by default.
• Polling Interval - The time interval, in minutes, between attempts to contact the information
source and gather data.
NOTE
The Polling Interval for NOS ethernet port optics collector is 30 minutes.
• Collectibles Type - At what level the data will be collected and the types of MIB objects used:
- Product Level - SNMP data is collected at the product (device) level.
- Port Level - SNMP data is collected at the port level.
• Source Defined - Whether or not the information source (product or port) is defined (Yes) or not
configured (No).
• System Collectors - Whether or not this is a system data collector. Refer to the following
sections for more information:
- “Editing system collectors” on page 996
- “Duplicating system data collectors” on page 1006
When you select a listed data collector, The following information is displayed in the Collector
Details field:
• MIB Variables - The MIB variables used (if any).
• Expression - The expression used (if any).
• Source - The defined products used as information sources by this collector.