Filter
Top Products
Brocade Network Advisor IP User Manual 1347
53-1003056-01
CLI Templates
G
TABLE 42 Network OS – Configure RX Missing Terminations Characters Monitor
Feature Description CLI Commands
Network OS This template is used to configure
threshold and alert values for RX
Missing Termination Characters
monitoring.
Possible values for timebase are
day, hour, minute and none.
Buffer value cannot be more than
average of high plus low threshold.
Supported Values for High and Low
Threshold Action Parameters are
email, raslog, all, and none.
threshold-monitor interface custom type Ethernet area
AbnormalFrameTerminations threshold timebase
$<Timebase|STRING> high-threshold
$<HighThresholdValue|INTEGER> low-threshold
$<LowThresholdValue|INTEGER> buffer
$<BufferValue|INTEGER>
threshold-monitor interface custom type Ethernet area
AbnormalFrameTerminations alert above highthresh-action
$<AboveHighThreshAction|STRING> lowthresh-action
$<AboveLowThreshAction|STRING>
threshold-monitor interface custom type Ethernet area
AbnormalFrameTerminations alert below highthresh-action
$<BelowHighThreshAction|STRING> lowthresh-action
$<BelowLowThreshAction|STRING>
threshold-monitor interface apply custom-monitoring
TABLE 43 Network OS – Configure RX Symbol Errors Monitor
Feature Description CLI Commands
Network OS This template is used to configure
threshold and alert values for RX
Symbol Errors Monitoring.
Possible values for timebase are
day, hour, minute and none.
Buffer value cannot be more than
average of high plus low threshold.
Supported Values for High and
Low Threshold Action Parameters
are email, raslog, all, and none.
threshold-monitor interface custom type Ethernet area
SymbolErrors threshold timebase $<Timebase|STRING>
high-threshold $<HighThresholdValue|INTEGER>
low-threshold $<LowThresholdValue|INTEGER> buffer
$<BufferValue|INTEGER>
threshold-monitor interface custom type Ethernet area
SymbolErrors alert above highthresh-action
$<AboveHighThreshAction|STRING> lowthresh-action
$<AboveLowThreshAction|STRING>
threshold-monitor interface custom type Ethernet area
SymbolErrors alert below highthresh-action
$<BelowHighThreshAction|STRING> lowthresh-action
$<BelowLowThreshAction|STRING>
threshold-monitor interface apply custom-monitoring
TABLE 44 Network OS – Configure Standard L2 Access List
Feature Description CLI Commands
ACL This template is used to configure
standard L2 ACL on Network OS
products running 3.0 or later.
mac access-list standard $<stdAclName|STRING>
deny $<denyMAC|MAC> $<mask1|MAC>
permit $<permitMAC|MAC> $<mask2|MAC>
permit any
TABLE 45 Network OS – Create CoS Mutation Map
Feature Description CLI Commands
QoS This template is used to create the
CoS-to-CoS mutation QoS map
name
qos map cos-mutation $<MapName|STRING>
$<MapValue|STRING>