Brocade Network Advisor IP User Manual 347
53-1003056-01
Viewing Call Home configurations
10
• Left arrow button (bottom) — Click to remove the selected event filter (refer to “Removing
all event filter from a Call Home center” on page 362 or “Removing an event filter from a
device” on page 363) from the selected Call Home center or product. Disabled when no
event filter, product, or Call Home center is selected in the Call Home Centers list.
• Call Home Centers list — The Call Home centers, products assigned to the Call Home
centers, and event filters assigned to the Call Home centers and products. This list
displays the following information:
Centers — A tree with Call Home centers as the parent node, assigned products as
subnodes, and event filters as the child node to the assigned products.
Enabled check box — Select the check box to enable the associated Call Home center
or clear the check mark to disable the Call Home center. By default, all check boxes
are selected during a fresh install.
Support Save check box — Select the check box to enable supportSave, which collects
diagnostic information on Fabric OS switches.
IP Address — The IP address of the product.
Node WWN — The node WWN of the product.
Fabric Name — The name of the VCS.
Vendor — The vendor of the product.
Call Home Status — One of the following Call Home statuses for the product:
- Enabled — The product is manageable and Call Home is enabled.
- Disabled — The product is manageable and Call Home is disabled.
- Not Manageable — The product is discovered but not manageable.
- Server Not Registered — The server is not registered to receive Call Home events
from the product.
NOTE
Call Home status only displays for Fabric OS, IronWare, and Network OS products.
Domain/RBridge ID — The domainor RBridge ID of the product.
Product Type — The type of product (switch, Layer 2 switch, router, or director).
• Edit Centers button — Select a call home center in the Centers list anc click Edit to open
the Configure Call Home Center dialog box and modify Call Home center information (refer
to “Editing a Call Home center” on page 349).
• Show/Hide Centers button — Click to open the Centers dialog box and add or delete a Call
Home center (refer to “Showing a Call Home center” on page 348 or “Hiding a Call Home
center” on page 348).
2. Click OK to close the Call Home dialog box.