Filter
Top Products
Brocade Network Advisor IP User Manual 381
53-1003056-01
AAA Settings tab
12
3. Add or edit a Radius server by referring to “Configuring a Radius server” on page 381.
4. Rearrange the Radius servers in the table by selecting a server and click the Up or Down
button to move it.
5. Delete a Radius server by selecting the server and click Delete.
6. Test the established active connection with the Radius server by clicking Test.
Test attempts to contact the Radius server by issuing a ping command.
7. Set secondary authentication by selecting one of the following options from the Secondary
Authentication list:
• Local Database
• None
8. Set the fall back condition to secondary authentication by selecting one of the following
options from the Fail Over Option list:
• Radius Servers Not Reachable
• Radius Authentication Failed
9. Set the authorization preference by selecting one of the following options from the
Authorization Preference list:
• Local Database
• Primary Authentication Server
10. Click Apply to save the configuration.
To display the authentication audit trail, refer to “Displaying the client authentication audit
trail” on page 391.
11. Click Close to close the Server Management Console.
Configuring a Radius server
To add or edit a Radius server, complete the following steps.
1. Choose one of the following options from the AAA Settings tab:
• Click Add.
• Select an existing Radius server and click Edit.
The Add or Edit Radius Server dialog box displays (Figure 144).
FIGURE 144 Add or Edit Radius Server