Filter
Top Products
614 Brocade Network Advisor IP User Manual
53-1003056-01
Layer 3 access control list policy
18
Editing a service
You can access the Service dialog box when configuring an extended L3 ACL device configuration.
To configure an extended L3 ACL, refer to one of the following procedures:
• “Creating an extended L3 ACL configuration” on page 585
• “Editing an extended L3 ACL configuration” on page 587
• “Copying an extended L3 ACL configuration” on page 588
• “Creating an extended L3 ACL configuration” on page 585
• “Editing an IPv6 L3 ACL configuration” on page 592
• “Copying an IPv6 L3 ACL configuration” on page 593
To edit a service, complete the following steps.
1. Click the Services tab.
2. Select the service you want to edit and click Edit.
The Edit Service dialog box displays.
3. Select one of the following protocol options:
• TCP
• UDP
4. Enter a port number in the Port field.
5. Click OK on the Edit Service dialog box.
6. Click Close on the Service dialog box.
To finish configuring the advanced settings for the ACL, refer to “Configuring L3 ACL advanced
settings” on page 598.
Copying a service
You can access the Service dialog box when configuring an extended L3 ACL device configuration.
To configure an extended L3 ACL, refer to one of the following procedures:
• “Creating an extended L3 ACL configuration” on page 585
• “Editing an extended L3 ACL configuration” on page 587
• “Copying an extended L3 ACL configuration” on page 588
• “Creating an extended L3 ACL configuration” on page 585
• “Editing an IPv6 L3 ACL configuration” on page 592
• “Copying an IPv6 L3 ACL configuration” on page 593
To copy a service, complete the following steps.
1. Click the Services tab.
2. Select the service you want to copy and click Duplicate.
The Duplicate Service dialog box displays.
3. Enter a name for the service in the Name field.