Filter
Top Products
5-77
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
OL-16506-17
Chapter 5 Software Upgrade Processes Supported by Cisco ASR 1000 Series Routers
Upgrade Process with Service Impact for Nonredundant Platforms
These instructions assume two IOS processes are active on the RP and that the router is already running
using subpackages.
SUMMARY STEPS
1. show version
show version installed
dir filesystem:<directory>
show platform
show redundancy-states
2. redundancy
mode sso
3. mkdir URL-to-directory-name
4. ip tftp source-interface gigabitethernet port
5. copy tftp: URL-to-target-location
6. request platform software package expand file URL-to-consolidated-package
7. dir URL-to-consolidated-package
8. copy file-system:asr1001-espbase.version.pkg URL-to-directory-of-sub-packages-active-RP
copy file-system:asr1001-rpaccess.version.pkg URL-to-directory-of-sub-packages-active-RP
copy file-system:asr1001-rpbase.version.pkg URL-to-directory-of-sub-packages-active-RP
copy file-system:asr1001-rpcontrol.version.pkg URL-to-directory-of-sub-packages-active-RP
copy file-system:asr1001-rpios.version.pkg URL-to-directory-of-sub-packages-active-RP
copy file-system:asr1001-sipbase.version.pkg URL-to-directory-of-sub-packages-active-RP
copy file-system:asr1001-sipspa.version.pkg URL-to-directory-of-sub-packages-active-RP
9. issu loadversion rp 0 file file-system:asr1001-{rpaccess,rpios,rpcontrol}*version-string*.pkg
bay standby-bay force
10. issu commitversion
11. redundancy force-switchover
12. show platform
13. issu loadversion rp 0 file file-system:asr1001-{rpaccess,rpios,rpcontrol}*version-string*.pkg
bay standby-bay force
14. issu commitversion
15. issu loadversion rp 0 file file-system:asr1001-{rpbase,sipbase,sipspa,espbase}*version*.pkg
force
16. show version installed
17. reload
Note Step 17 does not have to be performed immediately, and should be done at a convenient time.