Filter
Top Products
5-127
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
OL-16506-17
Chapter 5 Software Upgrade Processes Supported by Cisco ASR 1000 Series Routers
Upgrade Process with Service Impact for Nonredundant Platforms
Step 13
request platform software package install rp 0
file
file-system:asr1000rp2-{sipbase,sipspa}*version*.
pkg slot
SIP-slot-number force
Example:
Router# request platform software package
install rp 0 file
bootflash:asr1000rp2-{sipspa,sipbase}*03.13.00.
S.154-3.S-ext*.pkg slot 0 force
Router# request platform software package
install rp 0 file
bootflash:asr1000rp2-{sipspa,sipbase}*03.13.00.
S.154-3.S-ext*.pkg slot 1 force
Router# request platform software package
install rp 0 file
bootflash:asr1000rp2-{sipspa,sipbase}*03.13.00.
S.154-3.S-ext*.pkg slot 2 force
Upgrade the SIP and SPA subpackages for each SIP on the
router.
Note This step must be completed one SIP at a time, and
repeated for each SIP installed on the router before
performing the next step.
Tip You can use the show ip interface brief command
to identify which slots contain SIPs and SPAs. The
interfaces with three numbers (in the form
SIP-number/SPA-number/interface-number)
identify the SIP and SPA locations in the router.
Note The pattern options used in this CLI (sipbase and
sipspa) were introduced in Cisco IOS XE Release
2.1.2 and are not available in previous Cisco IOS
XE Releases.
See the “ISSU Procedures (Prior to Cisco IOS XE
Release 2.1.2)” section on page 5-72 for pre-Cisco
IOS XE Release 2.1.2 ISSU upgrade procedures.
Step 14
request platform software package install rp 0
file
file-system:asr1000rp2-{elcase,elcspa}*version*.p
kg slot
SIP-slot-number force
Repeat this step for each ELC installed in your
router before proceeding to the next step.
Example:
Router# request platform software package
install rp 0 file
bootflash:asr1000rp2-{elcspa,elcbase}*03.13.00.
S.154-3.S-ext*.pkg slot 0 force
Router# request platform software package
install rp 0 file
bootflash:asr1000rp2-{elcspa,elcbase}*03.13.00.
S.154-3.S-ext*.pkg slot 1 force
Router# request platform software package
install rp 0 file
bootflash:asr1000rp2-{elcspa,elcbase}*03.13.00.
S.154-3.S-ext*.pkg slot 2 force
Upgrade the ELC and SPA subpackages for each ELC on
the router.
Note This step must be completed for one ELC at a time,
and repeated for each ELCinstalled on the router
before performing the next step.
Tip You can use the show ip interface brief command
to identify which slots contain SIPs and SPAs. The
interfaces with three numbers (in the form
ELC-number/SPA-number/interface-number)
identify the ELC and SPA locations in the router.
Note The pattern options used in this CLI (elcbase and
elcspa) were introduced in Cisco IOS XE Release
3.10S and are not available in previous Cisco IOS
XE Releases.
Step 15
request platform software package install rp 0
file
file-system:asr1000rp2-esp*version*.pkg
force
Example:
Router# request platform software package
install rp 0 file
bootflash:asr1000rp2-esp*03.13.00.S.154-3.S-ext
*.pkg force
Upgrade the ESP Base subpackage.
Command or Action Purpose