Filter
Top Products
B-1
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
OL-16506-17
APPENDIX
B
Configuration Examples
This appendix is designed to provide examples of how some common networking tasks can be
accomplished on the Cisco ASR 1000 Series Routers. The examples in this appendix are provided for
illustrative purposes only; little or no context is given with these examples. See the other chapters in this
book (in particular Chapter 3, “Consolidated Packages and SubPackages Management”), for more
detailed explanations of the examples in this section.
When reading this section, also be aware that networking configurations are complex and can be
configured many ways. The examples in this section simply show one method of accomplishing a
configuration.
This appendix contains the following examples:
• Configuring the Router to Boot the Consolidated Package on the TFTP Server, page B-1
• Copying the Consolidated Package from the TFTP Server to the Router, page B-5
• Configuring the Router to Boot Using the Consolidated Package Stored on the Router, page B-6
• Extracting the SubPackages from a Consolidated Package into the Same File System, page B-7
• Extracting the SubPackages from a Consolidated Package into a Different File System, page B-9
• Configuring the Router to Boot Using the SubPackages, page B-10
• Backing Up Configuration Files, page B-14
• Enabling a Second IOS Process on a Single RP Using SSO, page B-15
• ISSU—Consolidated Package Upgrade, page B-19
Configuring the Router to Boot the Consolidated Package on the
TFTP Server
The following example shows how to configure the router to boot the consolidated package on the TFTP
server:
Router(config)# boot system
tftp://172.17.16.81/auto/tftp-users/user/asr1000rp1-adventerprisek9.02.01.00.122-33.XNA.bi
n
Router(config)#config-reg 0x2102
Router(config)# exit
*May 29 21:51:11.963: %SYS-5-CONFIG_I: Configured from console by user on console
Router# show run | include boot
boot-start-marker