Filter
Top Products
19-14
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
OL-16506-15
Chapter 19 Cisco ASR 1000 VxLAN Support
show nve peers
show nve peers
To display the network virtualization endpoint (NVE) peers configured on the router, use the show nve
peers command in EXEC mode.
show nve peers
Syntax Description This command has no arguments or keywords.
Command Modes EXEC (#)
Command History
Examples The following example shows the NVE peers configured on the router:
Router# show nve peers
Interface Peer-IP VNI Up Time
nve1 1.1.1.2 1010 10h
nve2 1.1.1.3 2030 20h
Table 19-2 describes the significant fields shown in the display.
Related Commands
Release Modification
Cisco IOS XE Release 3.11S This command was introduced on the Cisco ASR 1000 Series
Routers.
Table 19-2 show nve peers Field Descriptions
Field Description
Interface The NVE interface.
Peer-IP The peer IP address of the NVE interface.
VNI The VNI number.
Up Time The length of time for which the NVE interface has been up.
Command Description
show nve interface Displays the NVE interface information.
show nve vni Displays the NVE VNIs configured on the router.