11-21
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
OL-16506-17
Chapter 11 Network Synchronization Support
Configuring Network Synchronization
ESMC Information rate: 1 packet/second
ESMC Expiry: 5 second
ESMC Tx Timer: Running
ESMC Rx Timer: Running
ESMC Tx interval count: 1
ESMC INFO pkts in: 0
ESMC INFO pkts out: 256
ESMC EVENT pkts in: 0
ESMC EVENT pkts out: 0
Troubleshooting the Network Synchronization Configuration
Note Before you troubleshoot, ensure that all the network synchronization configurations are complete.
Table 11-4 provides information about troubleshooting scenarios that you may encounter while
configuring network synchronization.
Table 11-4 Troubleshooting Scenarios
Problem Solution
Incorrect clock
selection
• Verify that there are no alarms on the interfaces. Use the show
network-clock synchronization detail command to check this.
• Ensure that the nonrevertive configurations are in place.
Incorrect QL values Ensure that there is no framing mismatch with the SSM option.