Filter
Top Products
4-15
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
OL-16506-17
Chapter 4 Consolidated Packages and SubPackages Management
Managing and Configuring the Router to Run Using Consolidated Packages and Individual SubPackages
Installing an Optional SubPackage
Note If you install the Cisco WebEx Node for ASR 1000 Series SPA before the software subpackage is
installed, you will receive the error message %ASR1000_RP_SPA-3-MISSING_SPA_PKG_ERR. This
message will resolve once you download and install the appropriate sipspawma subpackage and then
reload the router in individual subpackage mode.
To run the router using an optional subpackage, perform the following steps for each RP in the system:
Step 1 Verify that the RP is running in individual subpackage mode and was booted from a provisioning file.
For more information, see the “Managing and Configuring a Router to Run Using Individual
SubPackages From a Consolidated Package” section on page 4-10.
Step 2 Verify that the version of the optional subpackage that you want to install is the same version as the
software running on the active RP.
Step 3 Download the optional subpackage that you want to install. Optional subpackages must be downloaded
independently from consolidated packages for the Cisco ASR 1000 Series Routers.
Step 4 On each RP, copy the optional subpackage to the directory where any other individual subpackages and
the provisioning file is located.
Step 5 Run the request platform software package install rp file command, as shown in the following
example.
Note Do not use the optional slot or bay keywords for the initial installation.
Router# request platform software package install rp 0 file
bootflash:asr1000rp1-sipspawmak9.BLD_V122_33_XND_ASR_RLS4_THROTTLE_LATEST_20090511_042308.
pkg
--- Starting local lock acquisition on R0 --- Finished local lock acquisition on R0
--- Starting file path checking ---
Finished file path checking
--- Starting image file verification --- Checking image file names Verifying image file
locations Locating image files and validating name syntax
Found asr1000rp1-
sipspawmak9.BLD_V122_33_XND_ASR_RLS4_THROTTLE_LATEST_20090511_042308.pkg
Inspecting image file types
Processing image file constraints
Creating candidate provisioning file
WARNING: No package of type sipspawmak9 is installed.
WARNING: Package will be installed for all SIP slots and bays.
Finished image file verification
--- Starting candidate package set construction --- Verifying existing software set
Processing candidate provisioning file Constructing working set for candidate package set
Constructing working set for running package set Checking command output Constructing
merge of running and candidate packages Checking if resulting candidate package set would
be complete Finished candidate package set construction
--- Starting compatibility testing ---
Determining whether candidate package set is compatible