Filter
Top Products
5-165
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
OL-16506-17
Chapter 5 Software Upgrade Processes Supported by Cisco ASR 1000 Series Routers
Using ISSU to Upgrade the Subpackages in a Dual Route Processor Configuration with MDR
copy file-system:asr1000rp2-espx86base.version.pkg
URL-to-directory-of-sub-packages-active-RP
copy file-system:asr1000rp2-rpaccess.version.pkg URL-to-directory-of-sub-packages-active-RP
copy file-system:asr1000rp2-rpbase.version.pkg URL-to-directory-of-sub-packages-active-RP
copy file-system:asr1000rp2-rpcontrol.version.pkg URL-to-directory-of-sub-packages-active-RP
copy file-system:asr1000rp2-rpios.version.pkg URL-to-directory-of-sub-packages-active-RP
copy file-system:asr1000rp2-sipbase.version.pkg URL-to-directory-of-sub-packages-active-RP
copy file-system:asr1000rp2-sipspa.version.pkg URL-to-directory-of-sub-packages-active-RP
copy file-system:asr1000rp2-elcbase.version.pkg URL-to-directory-of-sub-packages-active-RP
copy file-system:asr1000rp2-elcspa.version.pkg URL-to-directory-of-sub-packages-active-RP
Note In step 9, each individual subpackage that was extracted in step 6 is copied to the directory where
the subpackages that are currently running the standby RP are stored.
9. copy file-system:asr1000rp2-espbase.version.pkg URL-to-directory-of-sub-packages-standby-RP
copy file-system:asr1000rp2-espx86base.version.pkg
URL-to-directory-of-sub-packages-standby-RP
copy file-system:asr1000rp2-rpaccess.version.pkg URL-to-directory-of-sub-packages-standby-RP
copy file-system:asr1000rp2-rpbase.version.pkg URL-to-directory-of-sub-packages-standby-RP
copy file-system:asr1000rp2-rpcontrol.version.pkg
URL-to-directory-of-sub-packages-standby-RP
copy file-system:asr1000rp2-rpios.version.pkg URL-to-directory-of-sub-packages-standby-RP
copy file-system:asr1000rp2-sipbase.version.pkg URL-to-directory-of-sub-packages-standby-RP
copy file-system:asr1000rp2-sipspa.version.pkg URL-to-directory-of-sub-packages-standby-RP
copy file-system:asr1000rp2-elcbase.version.pkg URL-to-directory-of-sub-packages-standby-RP
copy file-system:asr1000rp2-elcspa.version.pkg URL-to-directory-of-sub-packages-standby-RP
10. issu checkversion rp standby-RP file standy-file-system:asr1000rp*version*.pkg mdr {force}
11. issu loadversion rp standby-RP file URL-to-standby-file-system:asr1000rp*version*.pkg force
12. hw-module slot standby-RP reload
13. issu loadversion rp active-RP file
URL-to-active-file-system:asr1000rp1-{sipbase,sipspa}*version*.pkg slot SIP-slot-number mdr
{force}
issu commitversion
Note Repeat this step for each SIP installed in the router before moving to the next step.
14. issu loadversion rp active-RP file
URL-to-active-file-system:asr1000rp2-{elcbase,elcspa}*version*.pkg slot ELC-slot-number mdr
{force}
issu commitversion