Filter
Top Products
5-97
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
OL-16506-17
Chapter 5 Software Upgrade Processes Supported by Cisco ASR 1000 Series Routers
Upgrade Process with Service Impact for Nonredundant Platforms
Step 15
issu loadversion rp 0 file
file-system:asr1000rp2-{sipbase,sipspa}*version*.
pkg slot
SIP-slot-number force
issu commitversion
Example:
Router# issu loadversion rp 0 file
bootflash:asr1000rp2-{sipspa,sipbase}*03.13.00.
S.154-3.S-ext*.pkg slot 0 force
Router# issu commitversion
Router# issu loadversion rp 0 file
bootflash:asr1000rp2-{sipspa,sipbase}*03.13.00.
S.154-3.S-ext*.pkg slot 1 force
Router# issu commitversion
Router# issu loadversion rp 0 file
bootflash:asr1000rp2-{sipspa,sipbase}*03.13.00.
S.154-3.S-ext*.pkg slot 2 force
Router# issu commitversion
Upgrade the SIP and SPA subpackages for each SIP on the
router.
Note This step must be completed one SIP at a time, and
repeated for each SIP installed on the router before
performing the next step.
Tip You can use the show ip interface brief command
to identify which slots contain SIPs and SPAs. The
interfaces with three numbers (in the form
SIP-number/SPA-number/interface-number)
identify the SIP and SPA locations in the router.
Note The pattern options used in this CLI (sipbase and
sipspa) were introduced in Cisco IOS XE Release
2.1.2 and are not available in previous Cisco IOS
XE Releases.
See the “ISSU Procedures (Prior to Cisco IOS XE
Release 2.1.2)” section on page 5-72 for pre-Cisco
IOS XE Release 2.1.2 ISSU upgrade procedures.
Note See the “SUMMARY STEPS” section on page 5-91
for ASR1000 Fixed Ethernet Line Card (ELC)
Upgrade.
Step 16
issu loadversion rp 0 file
file-system:asr1000rp2-{elcbase,elcspa}*version*.
pkg slot
SIP-slot-number force
issu commitversion
Repeat this step for each ELC installed in your
router before proceeding to the next step.
Example:
Router# issu loadversion rp 0 file
bootflash:asr1000rp2-{elcspa,elcbase}*03.13.00.
S.154-3.S-ext*.pkg slot 0 force
Router# issu commitversion
Router# issu loadversion rp 0 file
bootflash:asr1000rp2-{elcspa,elcbase}*03.13.00.
S.154-3.S-ext*.pkg slot 1 force
Router# issu commitversion
Router# issu loadversion rp 0 file
bootflash:asr1000rp2-{elcspa,elcbase}*03.13.00.
S.154-3.S-ext*.pkg slot 2 force
Router# issu commitversion
Upgrade the ELC and SPA subpackages for each ELC on
the router.
Note This step must be completed for one ELC at a time,
and repeated for each ELC installed on the router
before performing the next step.
Tip You can use the show ip interface brief command
to identify which slots contain ELCs and SPAs. The
interfaces with three numbers (in the form
ELC-number/SPA-number/interface-number)
identify the ELC and SPA locations in the router.
Note The pattern options used in this CLI (elcbase and
elcspa) were introduced in Cisco IOS XE Release
3.10Sand are not available in previous Cisco IOS
XE Releases.
Command or Action Purpose