Filter
Top Products
17-4
Cisco CSR 1000V Series Cloud Services Router Software Configuration Guide
Chapter 17 Enabling Management by REST API
Overview of Installation
Step 13
guest ip address remote-mgmt-ipv4-addr
Example:
router(config-virt-serv-intf)# guest ip address
172.25.29.236
Configures the remote-management IP address for
the vNIC gateway interface for the virtual services
container.
Step 14
exit
Example:
router(config-virt-serv-intf)# exit
Exits virtual services interface configuration mode
and enters virtual services configuration mode.
Step 15
activate
Example:
router(config-virt-serv)# activate
Activates the csr_mgmt virtual services container.
Step 16
end
Example:
router(config-virt-serv)# end
Exits virtual services configuration mode and enters
global configuration mode.
Step 17
ip route ipaddress subnetmask virtualportgroup virtualport-
groupnumber
Example:
router(config)# ip route 172.25.29.236
255.255.255.255 VirtualPortGroup0
Creates an IP route that maps to the virtual port
group. Use the same IP address that was configured
using the guest ip address command.
Command or Action Purpose