Filter
Top Products
19-10
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
OL-16506-15
Chapter 19 Cisco ASR 1000 VxLAN Support
interface nve
interface nve
To create a network virtualization endpoint (NVE) interface and enter NVE interface configuration
mode, use the interface nve command in global configuration mode. To remove the NVE interface, use
the no form of this command.
interface nve number
no interface nve number
Syntax Description
Command Modes Global configuration (config)
Command History
Examples
The following example enters NVE interface mode:
Router(config)# interface nve 1
Router(config-if)#
Related Commands
number The NVE interface number.
Release Modification
Cisco IOS XE Release 3.11S This command was introduced on the Cisco ASR 1000 Series
Routers.
Command Description
source interface-loopback Assigns a previously created loopback interface to an NVE
interface.