Filter
Top Products
18-62
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
OL-16506-17
Chapter 18 LSM-MLDP-based MVPN Support
Troubleshooting LSM MLDP based MVPN Support
neighbor 1.1.1.1 send-community both
neighbor 2.2.2.2 activate
neighbor 2.2.2.2 send-community both
exit-address-family
!
address-family ipv4 vrf red2
redistribute static
redistribute connected
neighbor 1.1.1.1 remote-as 100
neighbor 1.1.1.1 activate
neighbor 1.1.1.1 send-community both
neighbor 2.2.2.2 remote-as 100
neighbor 2.2.2.2 activate
neighbor 2.2.2.2 send-community both
exit-address-family
!
ip pim vrf red2 rp-address 11.11.11.11
!
Troubleshooting LSM MLDP based MVPN Support
Use these debug commands to troubleshoot the LSM MLDP based MVPN support on the Cisco ASR
1000 Series Aggregation Services Routers.
Command Purpose
debug mpls MLDP packet
debug mpls MLDP neighbor
debug mpls MLDP all
Used for MLDP debugging [RP].
debug ip igmp vrf blue Used for IGMP debugs.
debug ip pim vrf blue hello
debug ip pim vrf blue timer
debug ip pim vrf blue bsr
debug ip pim vrf blue auto-rp
Used for PIM debugs [RP].
debug mpls infra lfd mfi Used for IOS layer debugs.
deb pl so mpls Used for IOSD shim layer debugs.
configure terminal
platform trace [run|boot] slot [f0|f1|r0|r1] bay
0 process for mod cef level [debug|verbose ]
end
Used for FMAN-RP/FMAN-FP.
debug platform hardware qfp active feature
cef-mpls client mpls all
Used for QFP client.
debug platform hardware qfp active feature
cef-mpls datapath mpls all
Used for QFP server.