Filter
Top Products
5-91
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
OL-16506-17
Chapter 5 Software Upgrade Processes Supported by Cisco ASR 1000 Series Routers
Upgrade Process with Service Impact for Nonredundant Platforms
--- Starting commit of software changes ---
Updating provisioning rollback files
Creating pending provisioning file
Committing provisioning file
Finished commit of software changes
SUCCESS: Software provisioned. New software will load on reboot.
Router# reload
Using Subpackages for Software Upgrade on a Cisco ASR 1002 Router or Cisco ASR 1004 Router
(software upgrade Command Set)
This section provides instructions on using software upgrade for Cisco ASR 1002 or 1004 Router
running subpackages.
These instructions assume two IOS processes are active on the RP and that the router is already running
using subpackages. For information on checking and configuring two IOS processes on the same RP, see
the “Using Subpackages for Software Upgrade on a Cisco ASR 1002 Router or Cisco ASR 1004 Router
(software upgrade Command Set)” section on page 5-91.
SUMMARY STEPS
1. show version
show version installed
dir filesystem:<directory>
show platform
show redundancy-states
2. redundancy
mode sso
3. mkdir URL-to-directory-name
4. ip tftp source-interface gigabitethernet port
5. copy tftp: URL-to-target-location
6. request platform software package expand file URL-to-consolidated-package
7. dir URL-to-consolidated-package
8. copy file-system:asr1000rp2-espbase.version.pkg URL-to-directory-of-sub-packages-active-RP
copy file-system:asr1000rp2-espx86base.version.pkg
URL-to-directory-of-sub-packages-active-RP
copy file-system:asr1000rp2-rpaccess.version.pkg URL-to-directory-of-sub-packages-active-RP
copy file-system:asr1000rp2-rpbase.version.pkg URL-to-directory-of-sub-packages-active-RP
copy file-system:asr1000rp2-rpcontrol.version.pkg URL-to-directory-of-sub-packages-active-RP
copy file-system:asr1000rp2-rpios.version.pkg URL-to-directory-of-sub-packages-active-RP
copy file-system:asr1000rp2-sipbase.version.pkg URL-to-directory-of-sub-packages-active-RP
copy file-system:asr1000rp2-sipspa.version.pkg URL-to-directory-of-sub-packages-active-RP
copy file-system:asr1000rp2-elcbase.version.pkg URL-to-directory-of-sub-packages-active-RP