Filter
Top Products
19-13
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
OL-16506-15
Chapter 19 Cisco ASR 1000 VxLAN Support
show nve interface
show nve interface
To display the network virtualization endpoint (NVE) interface information, use the show nve interface
command in privileged EXEC mode.
show nve interface nve-interface [detail]
Syntax Description
Command Modes EXEC (#)
Command History
Examples The following example shows the status of NVE interface 1:
Router# show nve interface nve1
Interface: nve1, State: Admin Up, Oper Up Encapsulation: Vxlan
source-interface: Loopback0 (primary:11.11.11.11 vrf:0)
The following example shows a detailed display for NVE interface 1:
Router# show nve interface nve1 detail
Interface: nve1, State: Admin Up, Oper Up Encapsulation: Vxlan
source-interface: Loopback0 (primary:11.11.11.11 vrf:0)
Pkts In Bytes In Pkts Out Bytes Out
0 0 0 0
Table 19-2 describes the significant fields shown in the display.
Related Commands
nve-interface The NVE interface.
detail (Optional) Displays detailed information about the NVE interface.
Release Modification
Cisco IOS XE 3.11S This command was introduced on the Cisco ASR 1000 Series
Routers.
Table 19-1 show nve interface Field Descriptions
Field Description
VNI The VNI number.
mcast The multicast address.
VNI state The current state of the VNI.
Command Description
show nve peers Displays the NVE peers configured on the router.
show nve vni Displays the NVE VNIs configured on the router.