Filter
Top Products
15-2
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
OL-16506-17
Chapter 15 Monitoring and Maintaining Multilink Frame Relay
Configuring Multilink Frame Relay
Configuring Multilink Frame Relay
The mulitlink frame relay configuration processes are described in the Frame Relay - Multilink
(MLFR-FRF.16) feature guide. For more information, see the Frame Relay - Multilink (MLFR-FRF.16)
feature guide at:
http://www.cisco.com/en/US/docs/ios/ios_xe/wan/configuration/guide/wan_ml_fr_frf161_xe.html
Monitoring and Maintaining Frame Relay and Multilink Frame
Relay
You can use different show and debug commands to monitor and maintain frame relay and multilink
frame relay configurations.
You can use the following show commands to display the multilink frame relay configurations:
• show platform software frame-relay—Displays the statistics about frame relay permanent virtual
circuits (PVCs).
• show platform software mfr—Displays statistics about multilink frame relay information.
You can use the following debug commands to debug the multilink frame relay configurations:
• debug platform hardware qfp active interface frame-relay multilink—Debugs the multilink
frame relay interfaces in the Cisco QuantumFlow Processor (QFP).
• platform trace runtime process forwarding-manager module—Enables Forwarding Manager
Route Processor and Embedded Service Processor trace messages for the forwarding manager
process.
For additional information on the commands and the options available for each command, see the Cisco
IOS Configuration Fundamentals Command Reference document, located at:
http://www.cisco.com/en/US/docs/ios/fundamentals/command/reference/cf_book.html.