Filter
Top Products
8-16
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
OL-16506-17
Chapter 8 Multilink PPP Support for the Cisco ASR 1000 Series Routers
Additional References
• set dscp tunnel xx
• set prec tunnel xx
• police set-dscp-tunnel-transmit xx
• police set-prec-tunnel-transmit xx
The following example shows how to set the ToS value using the police set-prec-tunnel-transmit
option:
policy-map ppp
class class-default
police cir 4000000 conform-action set-prec-tunnel-transmit 3
Set action example:
policy-map ppp
class gold
set ip prec tunnel 1
Unsupported Features
The Cisco ASR 1000 Series Aggregation Services Routers do not support the following MLP features:
• In-Service Software Upgrade (ISSU) and Stateful Switchover (SSO) for MLP bundles
• The broadband L4 Redirect feature and the Intelligent Services Gateway feature
• Per-user firewall
• Lawful intercept
• MLP with MPLS-TE FRR
• Change of Authorization (CoA)
• Layer 2 input QoS classification
• The Multiclass Multilink Protocol (MCMP) RFC 2686 extension to LFI
• Per-user Access Control Lists (ACLs) applied through the RADIUS server are not supported.
However, ACLs applied through the virtual template definition for the bundle are supported.
• Only the MLP long-sequence number format is supported for the packet header format option.
Additional References
The following sections provide references related to the Multilink ppp protocol connections.
Related Documents
Related Topic Document Title
Cisco IOS commands Cisco IOS Master Commands List, All Releases
Configuring Multilink PPP Connections for Broadband
and Serial Topologies
Configuring Multilink PPP Connections for Broadband and Serial
Topologies
MLP Wide-Area Networking Configuration Guide: Multilink PPP, Cisco
IOS XE Release 3S