Filter
Top Products
18-3
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
OL-16506-17
Chapter 18 LSM-MLDP-based MVPN Support
• Configuring Data MDTs (optional)
• Configuring BGP MDT address family
• Configuring BGP vpnv4 address family
• Configuring BGP VRF address family
• Configuring PIM SM/SSM mode for the VRFs
SUMMARY STEPS
1. enable
2. configure terminal
3. mpls MLDP
4. vrf definition vrf-name
5. rd route-distinguisher
6. vpn id vpn_id
7. route-target [import | export | both] route-target-ext-community
8. route-target [import | export | both] route-target-ext-community
9. mdt default mpls MLDP root-node
10. mdt data mpls MLDP numberofdataMDTs
11. mdt data threshold bandwidth
12. exit
13. ip multicast-routing vrf vrf-name distributed
14. end
Note See Configuring the MDT Address Family in BGP for Multicast VPN for information on configuring an
MDT and vpnv4 address family session on the PE routers to establish MDT peering sessions for MVPN.
DETAILED STEPS
Command Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
• Enter your password when prompted.
Step 2
configure terminal
Example:
Router# configure terminal
Enters global configuration mode.