Filter
Top Products
Contents
xii
Cisco MGX 8800/8900 Series Hardware Installation Guide
Releases 2 - 5.2, Part Number OL-4545-01, Rev. H0, May 2006
Installation Procedures 5-52
Install Stability Plate for Seismic Anchoring 5-52
Ground the Frame Bonding Ground Connection for a Cisco-Supplied Rack 5-55
Measure Rack Space 5-57
Prepare for Rack Installation 5-58
Install the AC Power Supply Tray 5-61
Install the Air Intake Plenum 5-64
Install the Lower Fan Tray 5-64
Install the MGX 8950 Switch without a Mechanical Lift 5-65
Install the MGX 8950 Switch with a Mechanical Lift 5-74
Install the Upper Fan Tray 5-76
Install the Exhaust Plenum 5-76
Install the DC PEM(s) 5-77
Install the Cable Management Assembly 5-78
Connect the Fan Tray Power Cables to the MGX 8950 Switch 5-78
Connect the AC Power Supply Tray to the MGX 8950 Switch 5-80
Connect the DC PEM to the MGX 8950 Switch 5-84
Connect the Back Cards 5-88
Connect the Console Port 5-89
Connect Power to the MGX 8950 Switch 5-90
Connect the External Clock 5-95
Connect the Alarms 5-95
Connect the MP Connection 5-95
Connect the LAN1/2 Ports 5-96
Verify EMI Compliance 5-97
Installing the MGX 8830 or MGX 8830/B Switch 5-98
Installation Checklist 5-99
Installation Procedures 5-101
Install Stability Plate for Seismic Anchoring 5-101
Ground the Frame Bonding Ground Connection for a Cisco-Supplied Rack 5-104
Measure Rack Space 5-106
Prepare for Rack Installation 5-107
Install the AC Power Supply Tray 5-108
Install the MGX 8830 Switch without a Mechanical Lift 5-109
Install the MGX 8830 Switch with a Mechanical Lift 5-118
Install the Cable Management Assembly 5-122
Connect the AC Power Supply Tray to the MGX 8830 Switch 5-122
Connect the Back Cards 5-124
Connect the Console Port 5-124
Connect Power to the MGX 8830 Switch 5-126