Filter
Top Products
2-27
Cisco MGX 8800/8900 Series Hardware Installation Guide
Releases 2 - 5.2, Part Number OL-4545-01, Rev. H0, May 2006
Chapter 2 Illustrated Card List for MGX Switches and the MGX 8880 Media Gateway
Front Cards
FRSM
Supported models: MGX 8850 (PXM1E/PXM45), MGX 8850/B (PXM1E/PXM45), MGX 8830, MGX 8830/B
The Frame Relay service module (FRSM) enables Frame Relay communications over an ATM network.
The FRSM cards typically connect to a Frame Relay router. Communications from the Frame Relay
router are then connected through the ATM network by a soft permanent virtual circuit (SPVC) to a
remote device.
The FRSM-2CT3 allows full n x DS0 and DS1 channelization of T3s, for a maximum of 4000 virtual
connections per module. The FRSM-2CT3 supports 256 ports per module. The FRSM-8E1-C allows full
DS0 and n x DS0 channelization of the E1s, for a maximum of 248 ports per module. The FRSM-8T1-C
allows full DS0 and n x DS0 channelization of the T1s, for a maximum of 192 ports per module. FRSM-8
supports 1000 VCs per module.
When the FRSM is combined with a back card, a card set is created. Table 2-14 provides information
about each FRSM, interface, and corresponding back card.
Table 2-14 FRSM Cards, Interfaces, and Supported Back Cards
FRSM
Interface
Connections
Number of
Lines
Supported
Types of Lines
Supported
Maximum
Ports per
Module
Maximum
VCs per
Module Supported Back Cards
FRSM-2CT3 NNI/UNI Up to 2 Channelized T3
(up to 44.736 Mbps
±20 ppm)
256 4000 BNC-2T3
FRSM-2T3E3 NNI/UNI Up to 2 E3
(up to 34.368 Mbps
±20 ppm) and T3 (up
to 44.736 Mbps
±20 ppm)
2 2000 BNC-2E3
BNC-2T3
BNC-2E3A
FRSM-8E1 NNI/UNI Up to 8 E1
(up to 2.048 Mbps
±50 bps or 32 ppm)
8 1000 MGX-RJ48-8E1 (for
use in Australia)
RJ48-8E1
R-RJ48-8E1
SMB-8E1
R-SMB-8E1
FRSM-8T1 NNI/UNI Up to 8 T1
(up to 1.544 Mbps
±50 bps or 32 ppm)
8 1000 RJ48-8T1
R-RJ48-8T1
FRSM-8E1-C NNI/UNI Up to 8 Channelized E1
(up to 2.048 Mbps
±50 bps or 32 ppm)
248 1000 MGX-RJ48-8E1 (for
use in Australia)
RJ48-8E1
R-RJ48-8E1
SMB-8E1
R-SMB-8E1