Filter
Top Products
5-8
Cisco MGX 8800/8900 Series Hardware Installation Guide
Releases 2 - 5.2, Part Number OL-4545-01, Rev. H0, May 2006
Chapter 5 Installing the Cisco MGX Switch or Gateway
Installing the MGX 8850 (PXM1E/PXM45) Switch, MGX 8850/B or MGX 8880 Media Gateway
Complete the following steps to anchor your Cisco cabinet to a stability plate:
Step 1 Drill holes into the floor to install the stability plate. See Figure 5-2 for the dimensions.
Figure 5-2 Stability Plate Dimensions
Step 2
Use four 3/8 x 1 inch anchoring bolts (user-provided) to attach the stability plate to the floor.
Step 3 Roll the Cisco cabinet over the stability plate as shown in Figure 5-3.
H8380
C
L
3.35 in.,
8.51 cm
6.7 in.,
17.02 cm
3.35 in.,
8.51 cm
Cabinet
outline
9.5 in.,
24.13 cm
0.663 in., 1.68 cm
0.337 in., 0.85 cm
11.55 in.,
29.34 cm
18.0 in.,
45.72 cm
33.875 in.,
86.04 cm
34.550 in., 87.76 cm
18.0 in.,
45.72 cm