Cisco Systems MGX 8900 Switch User Manual


 
B-2
Cisco MGX 8800/8900 Series Hardware Installation Guide
Releases 2 - 5.2, Part Number OL-4545-01, Rev. H0, May 2006
Appendix
Notes about Cables and Connectors
Cable and Connector Naming Conventions
The suffix to the model number indicates the length of the cable. For example, 5610-50 indicates a
50-foot cable. Sometimes the suffix indicates the cable length in inches, rather than feet. This typically
occurs on Y-cables or adaptor cables.
Some entries in the cable tables include the gender of the connector and the number of pins. For example,
EIA/TIA-232/M25-M25 indicates a cable terminated with a male DB-25 connector at each end.
Cable Lengths
Cables are available in standard lengths of 10 feet (3 meters), 25 feet (7.6 meters), 50 feet (15 meters),
75 feet (22.8 meters), and 100 feet (30 meters). Lengths of 100 feet (30 meters) to 600 feet (183 meters)
can be specially ordered.
Standard Cisco MGX 8850 (PXM1E/PXM45), MGX 8850/B, and MGX 8880 Cables
The standard cables that Cisco can supply for the Cisco MGX 8850 (PXM1E/PXM45) and MGX 8850/B
systems appear in Table B-1.
Table B-1 Standard Cisco MGX 8850 and MGX 8850/B Cables Available from Cisco
Model Number Description Usage
CAB-T3E3-PL-AD 75 ohms coax/SMB-BNC T3 or E3 trunk interface
ASSY CBL SMB (M) to BNC (F) T3 or E3 trunk interface
T3/E3 SMB to SMB Posi-Lok Redundant usage
CAB-T3E3-PL-AD-6 Posi-Lok SMB to BNC 6 Ad T3 or E3 trunk interface
CAB-T3E3-PL-CE-AD T3/E3 SMB-BNC Posi-Lok A T3 or E3 trunk interface (International)
CAB-T3E3-PL-CE-Y T3/E3 SMB-BNC Posi-Lok Y Redundant usage (International)
CAB-SMB-BNC-Y Posi-lok SMB to BNC Y Ca Redundant usage
CAB-T3E3-PL-Y-6 Posi-lok SMB to BNC 6 Y Redundant usage
CAB-MCC-T1E1
CAB-MCC-T1E1-Y
Mini-coaxial (MCC) to BNC
cable
E1 interface
E1 interface (Redundant usage)
CAB-RBBN-16-T1E1
CAB-RBBN-16-T1E1-
Y
36-pin to 50-pin straight cable
with RBBN connector
T1 or E1 interface
T1 or E1 interface (Redundant usage)
1
5620 EIA/TIA-232/M25-F25 PXM-UI-S3 maintenance port to control
terminal, Cisco WAN Manager, or
external window device
5621 EIA/TIA-232/M25-M25 special Control or maintenance port to modem
Ground cable
(customer-supplied)
DC power.
See Table B-13 for details.