Filter
Top Products
2-113
Cisco MGX 8800/8900 Series Hardware Installation Guide
Releases 2 - 5.2, Part Number OL-4545-01, Rev. H0, May 2006
Chapter 2 Illustrated Card List for MGX Switches and the MGX 8880 Media Gateway
Back Cards
MGX-XF-UI
The MGX-XF-UI is a management back card that provides remote management capabilities for the
RPM-XF through a console connection, an auxiliary connection, and two fast ethernet (FE) ports. The
MGX-XF-UI is always installed in the lower rear bay back slot directly behind the RPM-XF. Figure 2-56
shows the MGX-XF-UI faceplate.
Figure 2-56 MGX-XF-UI Faceplate
1 AUX—An RJ-45 receptacle that provides
connection to an auxiliary device that is used
as an external terminal for local
administrative access.
3 STATUS LED
• Green—The back card is active.
• Off—The back card is not detected or a
major failure has disabled the back card.
2 CONSOLE—An RJ-45 receptacle that
provides a serial connection used for an
external terminal for local administrative
access.
4 ETHERNET 0 AND ETHERNET 1—Two
fast ethernet (FE) RJ-45 receptacles that
comply with Ethernet standards and that are
used to connect the RPM-XF to a
10/100BASE-T network management LAN.
80746
STATUS
ETHERNET 0
L
N
K
A
C
T
MGX-XF-UI
A
U
X
C
O
N
S
O
L
E
ETHERNET 1
L
N
K
A
C
T
4
1
2
3