Filter
Top Products
Appendix B
194 / iAnywhere Solutions, Inc.
Setting up Pylon for multiple Palm OS users
With Pylon Conduit and Pylon Pro from iAnywhere Solutions, multiple
Palm OS device users can access Lotus Notes PIM and, with Pylon Pro
only, custom database (Pylon Pro only) information from the same
desktop computer.
Requirements
Pylon supports syncing multiple Palm OS devices to the same desktop
computer under the following conditions:
■ Each user must be a registered user and have a valid Pylon license
number or a valid corporate license number.
■ Each additional user must have their own Palm user name set up in
Palm Desktop.
Setup Instructions
Follow these instructions to set up Pylon for each additional Palm OS
device user.
Note These instructions assume that Pylon already is installed on the desktop
computer and on the Palm OS device used during installation. You only
need to install Pylon once. If Pylon is not yet installed on the desktop,
see “Installing” (page 35) for instructions.
1. Open the Pylon Configuration Database. For instructions, see
“Accessing Pylon on your desktop computer” (page 60).
2. Click Create Configuration and create a configuration document
for the additional user, using her Palm user name and either her
individual Pylon license number or your corporate Pylon license
number.
3. Click Save and Close to save your changes and exit the new configu-
ration document.
4. Click Filters in the navigation pane.
5. Create custom filters for each PIM application or custom database
that the additional user will synchronize. In order to avoid confu-
sion when working with multiple users nd multiple filters, it is a
good idea to give the filters names that identify the user and the fil-
ter’s purpose, such as MMiller - Inbox, MLongust - Inbox.
For information about creating new filters for each application, see
the individual chapters in “Syncing Lotus Notes PIM applications”
(page 55) and “Syncing custom databases (Pylon Pro only)”
(page 131).
6. When you have finished creating new filters for the additional user,
click Configurations in the navigation pane.