Filter
Top Products
To copy an overexposed photo from the device control panel (color display)
1. Make sure you have paper loaded in the input tray.
2. Place your original face down on the scanner glass or load originals in the ADF.
3. Touch COPY, and then select Enhancements.
4. Select Photo.
5. Press START COPY Color.
To copy an overexposed photo from the device control panel (two-line display)
1. Make sure you have paper loaded in the input tray.
2. Place your original face down on the scanner glass or load originals in the ADF.
3. In the Copy area, press COPY repeatedly until Enhancements appears.
4. Press the right arrow,
, until the Photo enhancement setting appears, and then
press OK.
5. Press START COPY Color.
Collate a copy job
Collating allows you to create sets of copies in the same order that they are scanned
into the automatic document feeder (ADF). All copies are scanned into the device
memory before they are printed.
NOTE: The maximum number of pages that can be scanned and collated varies
by the model. You might have to break your print jobs into smaller page counts.
To collate copies from the control panel (color display)
1. Load originals in the ADF. For more information, see
Load the originals.
NOTE: If the paper size if set to automatic and you are going to copy and
collate a print job, the paper will be set to Letter- or A4-size, depending on the
location set on the control panel. If you are not using Letter or A4 paper, then
you will need to manually change the paper setting.
2. Touch COPY and then select Collate.
3. Touch On.
To collate copies from the control panel (two-line display)
1. Load originals in the ADF. For more information, see
Load the originals.
2. In the Copy area, press COPY repeatedly until Collate appears.
3. Press
until the On setting appears, and then press OK.
Apply Margin Shift to a Copy Job
Margin shift allows you to shift the copy image on the printed page to allow for binding
or a 3–hole punch. The image is shifted to the right by 9.6 mm (3/8 inch).
NOTE: An image may be cropped on the right edge because the copied image is
not scaled down by the Margin Shift feature.
Apply Margin Shift to a Copy Job
113