Filter
Top Products
Set the fax error correction mode
Typically, the device monitors the signals on the phone line while it is sending or
receiving a fax. If it detects an error signal during the transmission and the error-
correction setting is on, the device can request that a portion of the fax be resent.
Turn off error correction only if you are having trouble sending or receiving a fax, and
you want to accept the errors in the transmission. Turning off the setting might be
useful when you are trying to send a fax to another country/region, when you receive a
fax from another country/region, or if you are using a satellite phone connection.
To set the fax error-correction mode via the device control panel
▲ Device control panel: Press FAX, select Advance Fax Setup menu, and then
select Error correction mode.
To set the fax error-correction mode via the embedded Web server
1. Embedded Web server: Click the Settings tab, and then click Advanced Fax
Setup in the left pane.
2. Select On or Off in the Error Correction Mode drop-down menu.
3. Click the Apply button.
Set the dial type
Use this procedure to set tone-dialing or pulse-dialing mode. The factory-set default is
Tone. Do not change the setting unless you know that your phone line cannot use
tone dialing.
NOTE: The pulse-dialing option is not available in all countries/regions.
To set the dial type via the device control panel
▲ Device control panel: Press Setup, press Basic Fax Setup, and then use the
Tone or Pulse Dialing option.
To set the dial type via the embedded Web server
1. Embedded Web server (network connection): Click the Settings tab, and then
click Basic Fax Setup in the left pane.
2. Make a selection in the Tone or Pulse Dialing drop-down menu.
3. Click the Apply button.
Set the redial options
If the device was unable to send a fax because the receiving fax machine did not
answer or was busy, the device attempts to redial based on the settings for the busy-
redial and no-answer-redial options. Use the following procedure to turn the options on
or off.
• Busy redial: If this option is turned on, the device redials automatically if it
receives a busy signal. The factory-set default for this option is ON.
• No answer redial: If this option is turned on, the device redials automatically if the
receiving fax machine does not answer. The factory-set default for this option is OFF.
Change fax settings
95