Filter
Top Products
Change default settings for all future jobs (Windows)
To change the settings
1. Click Start, point to Settings, and then click Printers or Printers and Faxes.
- Or -
Click Start, click Control Panel, and then double-click Printers.
NOTE: If prompted, enter your administrator password.
2. Right-click the printer icon, and then click Properties, General Tab, or Printing
Preferences.
3. Change the settings that you want, and then click OK.
Change settings (Mac OS X)
To change the settings
1. On the File menu, click Page Setup.
2. Change the settings that you want (such as paper size), and then click OK.
3. On the File menu, click Print to open the print driver.
4. Change the settings that you want (such as media type), and then click OK or Print.
Print on both sides (duplexing)
You can print on both sides of a sheet of media either manually or automatically, by
using the duplexer.
NOTE: The printer driver does not support manual duplexing. Two-sided printing
requires an HP Automatic Two-sided Printing Accessory to be installed on the
device.
This section contains the following topics:
•
Guidelines for printing on both sides of a page
•
Perform duplexing
Guidelines for printing on both sides of a page
• Always use media that conforms to the device specifications. For more
information, see
Understand specifications for supported media.
• Specify two-sided printing options in your application or in the printer driver.
• Do not print on both sides of transparencies, envelopes, photo paper, glossy
media, or paper lighter than 16 lb bond (60 g/m
2
) or heavier than 28 lb bond (105 g/
m
2
). Jams might occur with these media types.
• Several kinds of media require a specific orientation when you print on both sides
of a page. These include letterhead, preprinted paper, and paper with watermarks
and prepunched holes. When you print from a computer running Windows, the
device prints the first side of the media first. Load the media with the print side
facing down.
Chapter 4
48 Print