Filter
Top Products
8-6 Setup and Other Utilities in the Desktop Manager Chapter 8
Speed
You can set the transmission speed used to send faxes. The higher the
setting, the faster the transmission. If you experience problems when
sending faxes, try a lower speed setting.
Pause Duration
You can set the length of the pause that you may have to insert when
dialing a long distance number.
Error Correction (ECM)
You can select this option to reduce system and line errors when sending
a fax. With this option selected, the system checks each outgoing fax for
lost data. If data has been lost from a portion of a page, the system
transmits that portion again after confirming that all data within that
portion can be transmitted successfully.
Auto Start Send
When you select this option, the MultiPASS starts scanning
automatically when you enter a number and press START or when you
press a speed dial number. If you don’t select this option, you must press
START twice to scan the document.
Off Hook Alarm
You select this option to turn on the alarm if the telephone’s handset is
off-hook.
Image Contrast
You can select a setting that determines the level of contrast in the
faxes you send. The Standard setting is usually appropriate for most
documents. However, based on the lightness or darkness of your original
fax document, you may prefer to lighten (Lighter) or darken (Darker)
the contrast for the fax transmission.
Fax Heading Position
You can select where you want the sent fax heading information (your
fax number, your name, and date and time) to print on the faxes you
send. This information is known as the Transmit Terminal Identification
(TTI).
On Error Resend
You can select this option if you want the MultiPASS to automatically
redial when an error occurs while sending a fax. If this option is selected,
you also select which pages should be resent:
❍ All Pages—all pages of the fax.