Filter
Top Products
8-8 Setup and Other Utilities in the Desktop Manager Chapter 8
❍ Dedcated Fax Receive (FaxOnly)—Automatically receive only fax
calls
❍ Manual Receive (Manual)—Require you to manually answer the
incoming call and then set the MultiPASS for an incoming fax
❍ Answering Machine Mode (AnsMode)—Automatically receive a call
with your answering machine
❍ Distinct Ring Pattern Detect (DRPD)—Automatically switch
between receiving a call either as a fax or telephone call based on the
ring tone for each type of call (This setting is applicable only if you
subscribe to a special network service with your phone company
that defines multiple ring tones for your phone line.)
Answer Silent Receive
You select this option to set the MultiPASS not to ring for an incoming
fax. (This is applicable only in FaxTel Mode and Fax Only Mode.)
Answer Number of Rings
If you cleared the Silent Receive option, indicating you want the
MultiPASS to ring for incoming fax calls, you specify the number of
times the MultiPASS should ring for the fax call. The MultiPASS will
only ring if you have connected a telephone.
Receive Conditions
You can specify how the system should handle an incoming fax under
the following conditions.
❍ If your computer is turned off:
You set the MultiPASS to print the fax (Print Fax) or save the fax in
its memory (Save in Memory).
❍ If your computer is turned on:
You set the MultiPASS to move the fax to the Desktop Manager on
your computer (Upload Fax), or to print the fax (Print Fax).
Report Print
You can specify whether or not you want a report to print with each fax
reception, or only when there is an error.
Restoring the Default Settings
If you want to restore the option default settings after making changes,
click Use Defaults.