Filter
Top Products
1-20 Introduction Chapter 1
❍ To stop copying at any time, press
STOP
. You may need to
lift the operator panel to remove the document (see page
10-3 for details).
❍ If an error occurs and the LCD displays
START AGAIN
,
reload the document and start copying again.
N
If the LCD displays
MEMORY FULL
while making multiple copies
of a document, do not use the multiple copy feature for copying the
document. Make single copies of the document instead (as many times
as required).
You may be able to make multiple copies if you first print out any faxes
that are stored in memory (see page 5-5).
Miscellaneous
If the Power Goes Out
If power to the MultiPASS is cut off, any documents stored in its fax
memory will be lost. Because of this, be sure to print documents stored
in memory or resend them as soon as possible. (The MultiPASS
automatically prints a Memory Clear Report when power is restored.
See page 10-26.)
While the power is out, the MultiPASS will receive telephone calls if a
telephone is attached. However, you cannot send or receive faxes. (If you
are using a cordless phone, you will not be able to make or receive calls.)
Avoid unplugging the MultiPASS unless absolutely necessary. This is the
same as a power outage.
Using Switch Boxes
Canon does not recommend using a switch box with the MultiPASS. To
use more than one printer, it’s a good idea to add a second parallel port
to your computer.
COPY
Press
START/COPY.