Filter
Top Products
9-16 Maintaining the MultiPASS C3500 Chapter 9
Replacing a BJ Tank in the BC-21e Color
BJ Cartridge
If you perform a print operation correctly but the output is blank,
portions are missing, or colors are very wrong, a BJ tank may be out
of ink. If the output is still blank after cleaning the print head at least
five consecutive times, replace the empty BJ tank in the BC-21e Color
BJ cartridge.
You leave the BJ cartridge in the MultiPASS when replacing a BJ tank.
The cartridge holder then moves to the
center of the unit.
❍ Grasp both sides and lift it up.
C
Do not try to move the cartridge holder manually, or you may damage
the unit. If the cartridge holder does not move and the unit beeps
several times, unplug the MultiPASS and let it cool for several minutes.
(The device has an automatic protection mode that prevents it from
overheating.) After allowing it to cool, plug the unit in again and press
the
CARTRIDGE
button to move the cartridge holder to the center of the
unit.
Open the
printer cover.
Press the
CARTRIDGE
button.
DO NOT TOUCH THE
ROUND SHAFT
DO NOT TOUCH THE
RIBBON CABLE
DO NOT TOUCH THE
GUIDE RAIL