Filter
Top Products
Option Description/Settings
RX MODE Sets the Receive Mode.
FILE PRINT Prints documents stored in the MultiPASS’s
memory (when the MultiPASS Desktop
Manager is installed).
ROLLER CLEANING Cleans the rollers inside the MultiPASS.
HEAD CLEANING Cleans the print head on the BJ cartridge.
NOZZLE CHECK Prints a test pattern to check whether the
BJ cartridge is functioning normally.
N
You can change the TX REPORT settings only through the MultiPASS
Desktop Manager.
Entering Information in the MultiPASS
When using the MultiPASS as a stand-alone fax machine, you must enter
your user information into the unit through the operator panel.
When entering information through the operator panel of the
MultiPASS, follow these guidelines.
❍ If you pause and do not make an entry for more than 60 seconds,
the MultiPASS returns to Standby mode. You must start the
procedure over from the beginning.
❍ If you make a mistake while entering registration information, you
can correct it in one of two ways:
•
Press < or > to move the cursor under the wrong character, and
then enter the correct character.
•
Press STOP and reenter the information.
B-2 Using the MultiPASS C3500 as a Stand-alone Fax Appendix B