Filter
Top Products
2-34 Printing With the MultiPASS C3500 Chapter 2
Printing On a Fabric Sheet
❍ Make sure the paper thickness lever is to the right
position.
❍ Make sure the paper support and paper output tray are
extended.
❍ Insert the sheet with the cloth side out (toward you) and
the open end up (away from the sheet feeder).
❍ Adjust the paper guide to the edge of the fabric sheet.
Insert the
fabric sheet.
Set up
the printer.
DO NOT TOUCH
THE GUIDE RAIL
DO NOT TOUCH
THE RIBBON
CABLE
OPEN END AT THE TOP