Filter
Top Products
Appendix B Using the MultiPASS C3500 as a Stand-alone Fax B-1
Stand-alone Fax
If you plan to use the MultiPASS C3500 as a stand-alone fax, and you do
not install the MultiPASS Desktop Manager, you must enter your name
and fax number from the operator panel. If you choose to use the
MultiPASS C3500 this way, you will not be able to use its many features,
such as speed dialing, PC faxing, or scanning.
Also, you will not be able to change the Transmit Confirmation Report
to print after every transaction. (The default for the TX REPORT is to
print only when there is an error in transmission.) Canon recommends
that you install the MultiPASS software as described in the Quick Start
Guide. See Chapter 3 for details on using the MultiPASS Desktop Manager.
N
In the United States, you are required by FCC regulations to include your
name and fax number every time you send a fax. Be sure to enter this
information.
LCD Menu System
To enter the LCD Menu System, press the FUNCTION button on the
operator panel. Then press < or > to move between selections and press
START/COPY to make a selection. Press STOP to exit the LCD Menu
System.
Option Description/Settings
USER SETTINGS
DATE & TIME
Set the date and time (24-hour clock) using the
numeric buttons.
UNIT TELEPHONE # Enter your fax number using the numeric
buttons (up to 20 characters).
UNIT NAME Enter the name you want to appear at the top of
each fax page you send (up to 24 characters).
TEL LINE TYPE Sets the dialing method the MultiPASS uses to
match the type of phone line you have—
TOUCH TONE or ROTARY/PULSE.
B
Using the MultiPASS C3500
as a Stand-alone Fax